Fisher FIS EB II

The Epoxy mortar for standard applications in concrete.

Package 390ml. / 585ml.

Introduction

The fischer injection mortar FIS EB II is an economical epoxy resin mortar for standard applications in cracked and and non-cracked concrete and for post-installed rebar connections. It is suitable for fixing heavy loads both indoor and outdoor. The FIS EB II can be installed with the approved system components fischer threaded rods FIS A / RGM or with reinforcement bars. The FIS EB II can be used in dry or wet concrete, as well as in water-filled drill holes. This makes the epoxy resin mortar a secure and reliable system under all work site conditions.

Applications

• Heavy steel constructions
• Consoles
• Silo installations
• Tall shelving
• Post-installed rebar connections

Features/Advantages

• The injection mortar FIS EB II has ETA assessments for anchorings in cracked concrete and for post-installed rebar connections.
• Due to the seismic approval for performance category C1 and C2, the FIS EB II can be safely used in earthquake regions.
• FIS EB II is the reliable system for fixing heavy loads indoors and outdoors.
• Due to the variable anchoring depths, the epoxy resin mortar is very versatile.
• The long processing time of FIS EB II is particularly suitable for applications in large and deep drillholes.

Application Procedure

• The epoxy mortar FIS EB II in combination with the anchor rod FIS A and RG M is suitable for pre-positioned and push-through installation.
• Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the static mixer.
• The mortar is injected bubble-free from the drill hole base.
• The mortar bonds the entire surface of the anchor rod with the drill hole wall and seals off the drill hole.
• The anchor rod is set manually by slightly rotating it until it reaches the drill hole base.
• During push-through installation, the annular gap between the anchor rod and the attachment is filled with FIS EB II.

Building Materials

• Concrete C20/25 to C50/60, cracked and non-cracked

Product Standard

• ETA-21/0470
• ETA-21/0469
• DoP No. 0296
• DoP No. 0340